Skip to content
Mon–Sat, 8am to 6pmProudly local to Winston-Salem, NC · (336) 555-0164
Winston-Salem Handyman Pros (336) 555-0164
Home / Services / Smart Home Installation

Smart Home Installation in Winston-Salem, NC

Smart home devices make a lot of sense in Winston-Salem's climate and housing. A smart thermostat can save real money through humid summers and chilly winters by adjusting when you're away or asleep. Video doorbells and cameras keep an eye on porches where packages pile up. Smart locks let family, dog walkers or a contractor in without hiding a key under the mat. But many older homes in Ardmore, the West End and Buena Vista have old wiring, thick plaster walls and no common wire at the thermostat, and even newer homes in Clemmons and Kernersville often have weak Wi-Fi in back rooms and garages. Devices that look simple on the box can turn into a weekend of frustration. Many Winston-Salem houses also run on heat pumps, which work differently from a furnace and need a thermostat set up for auxiliary heat so the electric backup doesn't run more than it should on a cold January morning.

We handle the installation and setup from start to finish. Our licensed electricians install hardwired video doorbells, smart switches and dimmers, and add a common wire for smart thermostats where needed. We mount cameras where they'll actually see what matters, install smart locks on doors that may need adjustment first, and connect everything to your Wi-Fi and the apps you'll use. If your Wi-Fi doesn't reach the porch or garage, we can help set up a mesh system or extender. Before we leave, we walk you through the apps, set up schedules and notifications the way you want them, and make sure everything works from your phone.

What this covers

  • Smart thermostat installation and setup
  • Hardwired video doorbell installation
  • Smart switches, dimmers and outlets
  • Smart locks and keypad deadbolts
  • Indoor and outdoor security cameras
  • Mesh Wi-Fi and extender setup
  • Smart speakers and hubs
  • App setup, schedules and walk-through
A note from around here: Older homes in Ardmore and the West End often need a common wire added for smart thermostats and careful switch installs in shallow boxes, while newer homes in Clemmons, Lewisville and Kernersville usually need Wi-Fi extended to cameras and doorbells.

How a smart home installation visit usually goes

Review Your Setup

We look at your devices, wiring, Wi-Fi coverage and the doors, walls and systems where everything will be installed.

Install the Hardware

Our licensed electricians handle the wiring, and we mount devices securely and neatly on doors, walls and exterior surfaces.

Connect and Configure

Each device is connected to Wi-Fi and its app, with settings, schedules and notifications set up the way you want.

Test and Teach

We test everything, walk you through how it works, and leave you confident using your new devices.

Power outages from ice storms and summer thunderstorms are a fact of life in the Piedmont, and they affect smart devices. Smart thermostats, cameras and locks may need to reconnect after the power returns, and battery-powered devices need backup plans. We recommend smart locks with a physical key backup and cameras that can record locally if the internet goes down. For important devices, a small battery backup on your router and modem helps keep things running during short outages. We'll help you set up devices so they come back online smoothly after an outage. Outdoor cameras and doorbells also take a beating from the weather here, so we mount them under eaves or porch roofs where we can, seal the mounting screws into brick or siding, and aim them away from afternoon sun glare that washes out the picture.

What shapes the price in Winston-Salem

Smart home installation costs depend on how many devices you're adding and what the wiring looks like behind them. A smart thermostat on compatible wiring is a short job; adding a common wire, configuring a heat pump with auxiliary heat or replacing an old low-voltage transformer takes longer. Hardwired doorbells depend on the existing chime and transformer. Smart switches go quickly in modern boxes with a neutral wire and take longer in shallow older boxes. Cameras mounted high on a two-story gable or on brick need ladders and masonry anchors, and weak Wi-Fi may mean adding a mesh point before devices work reliably. Installing several devices in one visit is much more efficient than one at a time.

Neighbors often ask

Will a smart thermostat work with my system?

Most do, but it depends on your heating and cooling system and the wiring at the thermostat. Heat pumps, common here, need a thermostat that supports them. Many older homes lack a common wire, which smart thermostats need for power. Our licensed electricians can add one or install an adapter, and we'll confirm compatibility before buying.

Can you install a video doorbell on my brick house?

Yes. We mount the doorbell on brick with masonry anchors, and for hardwired doorbells, connect it to your existing doorbell wiring and transformer. If the transformer is too weak for the new doorbell, we'll upgrade it. If there's no existing doorbell wiring, our licensed electricians can run it.

Do I need a hub for smart devices?

Not always. Many devices now work directly with Wi-Fi or a phone app. Some systems, especially those using Zigbee or Z-Wave, need a hub. We'll look at the devices you have or want and recommend the simplest setup that works together.

Can you install smart switches in my older home?

Usually, yes. Many smart switches need a neutral wire, which older homes sometimes lack in switch boxes. Older boxes can also be shallow. Our licensed electricians check the wiring, choose switches that work with what you have, or update the box and wiring where needed.

Can I control my devices when I'm away?

Yes. Once your devices are connected to Wi-Fi and their apps, you can control them from your phone anywhere with an internet connection. We'll set up remote access and notifications, and show you how to share access with family members.

Can you set up smart lights and switches for my porch and driveway?

Yes. We install outdoor-rated smart switches or plug-in controllers, set lights to come on at sunset and off at a set time, and link them to motion cameras if you'd like the floodlights to switch on when someone walks up. It's a simple upgrade that makes a dark driveway or side yard safer.

Folks pair this with

Drywall Repair

Drywall Repair →

TV Mounting

TV Mounting →

Furniture Assembly

Furniture Assembly →

Door Repair & Adjustment

Door Repair & Adjustment →

Smart Home Installation around Winston-Salem

Smart Home Installation is one of 14 jobs our Winston-Salem handyman crew handles, in Winston-Salem and in nearby communities:

Ready to get your Smart Home Installation handled?

Send a photo and a sentence — we'll answer with a real price and a real day on the calendar.

Tap to Call (336) 555-0164